machinerylubrication.com

Please wait for loading...




      (967):

    /
     1  +1 2014 sep 08food grade greaseUnderstanding Food - Grade Lubricants - Machinery LubricationFood Safety Health and safety are priorities for food , drink and drug manufacturers. Standards of cleanliness and hygiene are as important on the shop room ...
     1  ~ 2014 sep 07hydraulic fluid overheatingSolving Hydraulic System Overheating Problems1, the causes of overheating and its remedies are often not well understood by maintenance ... Heating of hydraulic fluid in operation is caused by inefficiencies.
     1  ~ 2014 sep 02iso vg oil standardISO Viscosity Grades - Machinery LubricationThere are SAE (Society of Automotive Engineers) grades for gear oils and ... In 1975, the International Standards Organization (ISO), in unison with ... It is known as the International Standards Organization Viscosity Grade, ISO VG for short.
     1  +2 2014 sep 01food grade lubricantsFood Grade Lubricants - Resources And AdviceFood Grade Lubricants • Lubricants acceptable for use in meat, poultry and other food processing equipment, applications and plants. The lubricant types in ...
     1  +2 2014 aug 26lubricant guide gearsLubrication Selection for Enclosed Gear DrivesSelecting the proper industrial gear lubricant is important to the long-term efficient ... nameplate or in the published specifications found in the operator's manual .
     1  +1 2014 aug 05hydraulic oil moisture standardWater Contamination in Hydraulic and Lube SystemsWater can be present in hydraulic fluids and other lubricants as either dissolved, ... Relative content expressed as percent of saturation indicates the fluid water  ...
     1  ~ 2014 jul 24hydraulic oil flushing procedureCleaning and Flushing Basics for Hydraulic Systems and Similar Document results as part of the total flushing procedure . ... Perform new cleaning and hot oil flushing after component changes, assembly, disassembly or similar ...
     1  +2 2014 jul 24food grade lubricant
     1  +3 2014 jul 16lubricants greace oilThe Enduring Grease vs. Oil Debate - Machinery LubricationMany who claim to be purists tout that they prefer oil over grease . But then again, there are those die-hard grease advocates who have their own orthodoxy.
     2  +1 2014 sep 27hydraulic oil gradesHow to Select the Right Hydraulic Oil - Machinery LubricationWith hydraulics, there are two primary considerations - the viscosity grade and the hydraulic oil type. These specifications are typically determined by the type of  ...
     2  ~ 2014 sep 15journal bearingsJournal Bearings and Their Lubrication - Machinery LubricationJournal or plain bearings consist of a shaft or journal which rotates freely in a supporting metal sleeve or shell. There are no rolling elements in these bearings .
     2  +3 2014 sep 03full flow oil filterOil Filter Advice - Machinery LubricationAutomotive oil filters fall into two categories, full - flow and bypass. Bypass oil filters take about 10 percent of the oil pumped from the sump, filter it and then return ...
     2  ~ 2014 aug 31signs of leaking hydraulicDetecting and Managing Hydraulic System LeakageIt is unfortunate, that many leaks identified in hydraulic systems are left to drip away the ... temperatures are the first visual signs of excessive internal leakage .
     2  +2 2014 aug 20oil level sensorAn Overview of Oil Level Sensors and How They WorkOil sensors and analyzers are used in automotive and industrial applications to gather or send valuable information. They can range from a simple, float-type oil  ...
     2  ~ 2014 aug 19quality of hydraulic oilThese specifications are typically determined by the type of hydraulic pump ... Other items for consideration are: base oil type, overall lubricant quality and ...
     2  ~ 2014 jul 27measuring fuel oil qualityOil and Fuel Monitoring Using the ViSmart Viscosity SensorDetermining oil quality in real time with embedded and portable oil assessment devices operated by mechanic personnel provides the operational flexibility and  ...
     2  ~ 2014 jul 27plain journal bearing
     2  +2 2014 jul 17lubricant storage and dispensingLubricant Storage and Dispensing Buyers GuideLubricant storage and dispensing is an important part of any lubrication program. Without proper storage and dispensing containers, lubricants may become ...
     3  ~ 2014 sep 12hydraulic cylinder repairCarrying Out Effective Repairs to Hydraulic CylindersAs a result, many hydraulic equipment owners carry out cylinder repairs themselves. The following is a guide to carrying out effective repairs to hydraulic  ...
     3  +1 2014 sep 03grease gun pump manualAnatomy of a Grease Gun - Machinery LubricationManual (Lever) – This is the most common type of grease gun and can supply around 1.28 grams of grease per pump , which is forced through an aperture from  ...
     3  +4 2014 sep 03grease gun pump operationGrease Guns - Learning the Basics - Machinery LubricationWe also have a wide range of equipment operating speeds within our facility. ... Grease guns vary in the amount of grease pumped per stroke, from one to three ...
     3  +3 2014 aug 30rbot test oilLooking Forward to Lubricant Oxidation? - Machinery LubricationHistorically, we have employed oil analysis to identify lubricant oxidation by trending the ... ASTM D2272, formerly called the rotating bomb oxidation test ( RBOT ). In essence, the test involves placing a sample of oil into a pressure vessel along ...
     3  ~ 2014 aug 30industrial lubrication storageLubricant Storage Life Limits - Industry Needs a StandardWhat is the acceptable storage life for a pail of Lithium Complex EP grease , or a drum of R&O 32 Turbine Oil? What difference does the storage environment ...
     3  +1 2014 aug 08types of reciprocating compressorsReciprocating Compressor Basics - Machinery LubricationThere are two primary classifications of industrial compressors : intermittent flow ( positive displacement), including reciprocating and rotary types ; and continuous  ...
     3  -1 2014 aug 03lubrication of vankel engineRotary Engine Lubrication System Explained - Machinery LubricationThis video explains the lubrication system of a rotary engine . Access this 1- minute, 40-second video by clicking on the link below.
     3  -1 2014 aug 01oil machine psdIs Your Particle Counter Giving You PPM and Size Distribution?Particle size distribution is as important to oil analysis as frequency distribution is to ... reflects what is expected to be normal wear from this type of equipment .
     3  +4 2014 jul 24sell project idea5 Simple Steps to Sell Your Project to Upper ManagementAs a consultant employed to get these massive lubrication projects started, ... Following are five steps that can help you sell your project or idea to management.
     3  +8 2014 jul 20dissolved gas analysisUsing Dissolved Gas Analysis to Detect Active Faults in Oil-Insulated The analysis of gases from petroleum products has been performed for decades using gas chromatography. However, this technique was not applied ...
     3  +4 2014 jul 16high temperature greaseHigh - Temperature Greases - Machinery LubricationThere are many criteria to consider when selecting a high - temperature grease for hot, grease-lubricated equipment. The selection must include consideration of ...
     4  -1 2014 sep 16dynamic viscosityUnderstanding Absolute and Kinematic ViscosityOf all the tests employed for used oil analysis, none provides better test repeatability or consistency than viscosity . Likewise, there is no property more critical to ...
     4  +3 2014 sep 02oil cleanliness levelHow Important is the ISO Cleanliness Code in Oil Analysis?Often times, an end user will establish a target value to achieve, thus offering a level of confidence so long as the used oil sample meets this established target.
     4  +4 2014 sep 01reciprocating air compressorVarious compressors are found in almost every industrial facility. Types of gases compressed include the following: Air for compressed tool and instrument air  ...
     4  +2 2014 aug 22oil bearing wikiOil Whirl and Whip Instabilities - Within Journal BearingsOil whirl is probably the most common cause of subsynchronous instability in hydrodynamic journal bearings . Typically, the oil film itself flows around the journal ...
     4  +1 2014 aug 05lithium based greaseGrease Selection: Lithium vs. Lithium ComplexAccording to a recent NLGI Grease Production Survey, approximately 70 percent of the grease sold worldwide is based on either simple lithium soap or lithium  ...
     4  ~ 2014 aug 03radial journal bearingsSimple shell-type journal bearings accept only radial loading, perpendicular to the shaft, generally due to the downward weight or load of the shaft. Thrust or ...
     4  +1 2014 jul 31hydraulic filters designThe Pros and Cons of Various Hydraulic Filter LocationsSo when considering the possible locations for filters in a hydraulic system, the ... but pressure is not high enough to complicate filter or housing design . This ...
     4  +3 2014 jul 28plain bearing designJournal or plain bearings consist of a shaft or journal which rotates freely in a ... Their design and construction may be relatively simple, but the theory and ...
     4  +32 2014 jul 26vibrations and fuel monitoringOil and Fuel Monitoring Using the ViSmart Viscosity Sensor ... The sensors are unaffected by shock or vibration or by flow conditions, so they can be used in ...
     4  +3 2014 jul 17gearbox lubrication systemsLubrication System for a Gearbox - Machinery LubricationThis video was shot at an industrial facility after it had set right its gearbox lubrication system . Access this 1-minute, 3-second video by clicking on the link below.
     5  -2 2014 sep 26base oil complete informationUnderstanding the Differences in Base Oil GroupsThe first three groups are refined from petroleum crude oil. Group IV base oils are full synthetic (polyalphaolefin) oils. Group V is for all other base oils not ...
     5  +3 2014 aug 28reliable used compressorOil Analysis Boosts Compressor Reliability - Machinery LubricationThe key analysis parameters vary with the type of lubricant being used . Most new rotary compressors are equipped with polyglycol-based lubricants. With a ...
     5  ~ 2014 aug 26oil analysis equipmentOn-site Oil Analysis - is It a Replacement For Lab Analysis?Many factors must be considered when determining the extent to which on-site oil analysis test equipment will be used. On-site testing can range from having a ...
     5  -2 2014 aug 24capacity of evonikEvonik to Expand Oil Additives Capacity in SingaporeEvonik Industries recently announced a significant expansion of its oil additives plant in Singapore, which is scheduled to be completed in early 2015.
     5  ~ 2014 aug 24oil testing equipmentWith the availability of on-site oil analysis tools, a strong fight is waging to ... The cost of typical on-site test equipment can range from $2,000 to well over ...
     5  ~ 2014 aug 12rebuilt hydraulic cylindersAs a product group, cylinders are almost as common as pumps and motors combined. They are less complicated than other types of hydraulic components and ...
     5  +3 2014 aug 11high speed gearsCooling and Lubrication of High - speed Helical GearsHelical gears are used to reduce the speed of centrifugal compressors and turbines to match nominal motor and generator speeds . Proper lubrication and ...
     5  +3 2014 aug 07grease storage cansStoring Grease to Avoid Bleed and Separation - Machinery LubricationASTM D-1742 Oil Separation from Lubricating Grease During Storage – This test predicts .... It is not unusual to find grease containers in storage areas that have ...
     5  +13 2014 jul 23earth friendly greaseEco - friendly Grease Based on Ricin Oil and Cellulose DerivativesA team of researchers from the University of Huelva has developed an environmentally friendly lubricating grease based on ricin oil and cellulose derivatives, ...
     6  +1 2014 sep 02synthetic aviation gear oilSynthetic Gear Oil Selection - Machinery LubricationSynthetic gear oils are used whenever mineral gear oils have reached their ... In the past, these lubricating oils were mainly used in aviation technology for the ...
     6  ~ 2014 aug 31the lubricant storeDesigning the Optimum Lubricant Storeroom - Machinery LubricationWhen drawing plans to revamp the oil store , it is important to consider the amount of ... ownership and enthusiasm in the store , and ensure proper lubrication .
     6  -1 2014 aug 21problems on hydraulic pressSymptoms of Common Hydraulic Problems and Their Root CausesIn the case of hydraulic systems, there are three easily detectable symptoms that give early warning of root cause conditions. These symptoms are abnormal ...
     6  +5 2014 aug 02maxum oil chesterton inRelaDyne Acquires Maxum Petroleum - Machinery Lubrication"The location of Maxum's Paulson Oil Co. in Chesterton , Ind., gives us a natural expansion to offer new products and services to the Chicago marketplace," ...
     6  +2 2014 jul 26hydraulic suction strainersDeciding Whether to Install Suction Strainers on Hydraulic Pump A hungry donkey enters a barn in search of hay. Much to his delight, he discovers two identical haystacks, each on the opposite side of the barn. The donkey ...
     6  +17 2014 jul 25discharge electrostatic chargeElectrostatic Charge Generation - Machinery LubricationThis effect manifests itself in several ways, the most obvious being an audible noise (clicking sound) as discharge of electrostatic charge accumulation causes  ...
     6  +3 2014 jul 25tire treadwear chartHow to Buy Tires - Machinery LubricationTread wear is used only as a comparative between the tires of the same manufacturer. ... Our tire can support 1,201 pounds according to this chart , or 4 X 1,201 ...
     6  ~ 2014 jul 25calcium complex soapThey have better water resistance properties compared to sodium soap greases, better high-temperature properties compared to calcium soap greases, and ...
     6  -1 2014 jul 22coolant in oilThe Effects of Glycol Contamination in Engine OilsGlycol contamination is common in engine oils and can greatly alter the properties of the lubricant. Antifreeze causes a thickening of the oil , increasing the ...
     7  +4 2014 oct 02hydraulic fluid reservoirWhy the Tank May Well Be a Hydraulic Fluid's Best FriendThis is why I often refer to hydraulic fluid as the most important component of ... of these – and possibly the hydraulic fluid's best friend – is the reservoir or tank.
     7  -3 2014 aug 07steel worm drivesThe Ins and Outs of Worm Gears - Machinery LubricationA gear consisting of a shaft with a spiral thread that engages with and drives a toothed wheel. ... They are typically comprised of a steel worm and a brass wheel .
     7  +14 2014 jul 31copper bushing axis bearingLow-speed pins and bushings are a form of journal bearing in which the shaft
     7  +8 2014 jul 19greem growth lubricantsTips on Finding the Best Shade of Green in LubricantsThe biodegradable and bio-based lubricants market is growing at a rate well in excess of traditional lubricants . Most of this growth is occurring in Europe and ...
     7  +9 2014 jul 19green growth lubricants
     7  +1 2014 jul 18synthetic lubricants buyerSynthetic Lubricant Advice for Off-Highway Crankcase ApplicationsSynthetic lubricants can be cost-effective alternatives to traditional mineral oils in off-highway engine ... Definition of Synthetic Lubricants - Buyer Beware
     8  -1 2014 sep 26types of lubricantsWhat Is Lubrication ? - Machinery LubricationLubrication is a word that's often used in regards to machinery reliability and ... There are three different types of lubrication : boundary, mixed and full film.
     8  -1 2014 sep 22steam turbine mtbf tbaUpdating Your Sealing Technology - Machinery LubricationIn the late 1990s, the published mean-time-between-failure ( MTBF ) rates for centrifugal ... The trend toward gas seals in steam turbines , which was started and ...
     8  +7 2014 aug 28iso filter testingClarifying the New ISO Contamination Filtration StandardsThe ISO Technical Committees responsible for fluid power ( ISO /TC131/SC6) have recently ... The multi-pass test is a means of determining a filter's performance; ...
     8  +1 2014 aug 12water in oilWater In Oil Contamination - Machinery LubricationThe addition of more water to an emulsified oil / water mixture will lead to a separation of the two phases producing a layer of free water as well as free and/ or ...
     8  +11 2014 aug 08magnetic filter manufacturerApplications and Benefits of Magnetic FiltrationWhile a large number of configurations exist, most magnetic filters work by producing a .... There are several suppliers of magnetic wraps, coils or similar devices ...
     8  +4 2014 aug 07oil dip stickDipstick Oil Analysis - Machinery LubricationDipstick oil analysis may sound a little goofy, but it works. Not to mention it's also cheap and quick. There's only one problem - figuring out what the oil on the ...
     8  +8 2014 aug 03compressor lubricant manufacturerLubricant Realizes Long Air Compressor Service LifeTags: compressor lubrication , synthetic lubricants . Selecting the right ... One gas manufacturer understands the importance of selecting the right lubricant .
     8  +7 2014 jul 19replace linear bearingThomson Rolls Out Self-Lubricating Linear Bearing Pillow BlocksThomson introduces "Lube for Life" Self-Lubricating Linear Bearing Pillow Blocks ... MRO specialists who need to replace linear bearings in existing applications ...
     9  -4 2014 sep 25fire resistant hyraulic fluidWater Glycol - Fire - Resistant Hydraulic Fluids - Machinery LubricationWater glycol fluids have proven to be an excellent fire - resistant hydraulic fluid option. The fire-resistance of these fluids depends upon the vaporization of the ...
     9  -1 2014 sep 23nlgi 2What is NLGI ? - Machinery LubricationThe NLGI number system categorizes greases according to their hardness, from an NLGI No. 000 through No. 6, with an NLGI No. 2 being the most common.
     9  -1 2014 sep 05eg metal rollerWear Resistance Test for Aluminum and Nylon RollerBut metal and non- metal e.g. example nylon, plastic, graphite etc., the mutual solubility is relatively small, the tendency to coherence of two materials is greatly  ...
     9  -4 2014 aug 17determination of viscosityOil Viscosity - How It's Measured and ReportedBut what do we really mean when we talk about an oil's viscosity ? ... The most common method of determining kinematic viscosity in the lab utilizes the capillary  ...
     9  -2 2014 aug 06oil pump electric motorsOil Mist-lubricated Pumps and Electric Motors - Machinery LubricationThis article covers an overview of oil mist lubrication, along with a brief review of past and current best practices in pumps and electric motors . Additionally, the ...
     9  +18 2014 aug 06sludge dissolver estersA Condensed Guide to Compressor LubricantsPAGs offer the ability to dissolve sludge and deposits, burn without leaving ... Esters have a very high detergency and solvency, making them excellent at ...
     9  +2 2014 jul 17alemite fittings ukGrease Gun Buyers Guide - Machinery LubricationArthur Gulborg and his father named it “The Alemite High-Pressure Lubricating System” after the Alemite ... The Zerk design, named after Oscar Zerk , used a fitting much smaller than the Alemite pin-type and did not ... www.kingfisherlub.co . uk .
     10  -2 2014 oct 03high temperature heating problemsWhile the operation of any hydraulic system at temperatures above 180°F should be avoided, fluid temperature is too high when viscosity falls below the ...
     10  +1 2014 sep 30measuring water viscosity2 Ways to Measure Oil Viscosity - Machinery LubricationThe two ways of measuring and reporting viscosity , kinematic and absolute (also ... can conclude that the absolute viscosity of honey is greater than that of water .
     10  +8 2014 sep 23in wearHow to Combat Break- in Wear - Machinery LubricationWhen a machine is first put into service, there is a period of time known as the “ break-in” period. During this time, the machine creates wear debris as ...
     10  -5 2014 sep 19industrialcoopIndustrialCOOP Debuts Industrial Lubricant DirectoryIndustrialCOOP .com, founder of a co-op search engine for the international engineering and manufacturing community, launched its new Industrial Lubricant  ...
     10  +44 2014 sep 12pengertian bearing stressHow Age and Contamination Affect Rolling Bearings and GearsThe author will address bearing and gearing surface degradation leading to ... Hertz stress of approximately 2,410 MPa (350,000 PSI) on the bearing inner race.
     10  +9 2014 sep 07natural gas compressorsReciprocating Natural Gas Compressors - Machinery LubricationGas transmission applications are typically powered by a reciprocating engine fueled by natural gas . These compressors may be located in the field at a remote  ...
     10  +42 2014 aug 31refurbished hydraulic cylinders
     10  -4 2014 aug 18hydraulic oil coolerInstalled cooling capacity typically ranges between 25 and 40 percent of input ... ( 82°C) damage most seal compounds and accelerate degradation of the oil .
     10  +39 2014 aug 07facility forklift maintenancePM Improvements at Toyota Lift Truck Plant - Machinery Lubrication“We're still kind of unknown, even in our own town,” says Fred Williams, the company's customer center and service training manager. “My vision of a small town ...
     10  +4 2014 aug 06electric motor bearingsLubrication Strategies for Electric Motor BearingsThis discussion will focus on grease lubrication methods for electric motor bearings . All too often, an industrial user will employ less-than-ideal lubrication ...
     10  +2 2014 aug 03frezing point machineLow Temperature and Viscosity Limits - Machinery LubricationDropping below the pour point and the higher viscosity not only restricts oil flow ... machine oils), this pour point corresponds to the temperature that freezes the ...
     11  +8 2014 sep 22delo 400 leDelo 400 LE SAE 15W-40 API CJ-4 Tested, Ready for 2010Tests done in engines using DPF, SCR and DEF before Delo 400 LE 15W-40 was introduced in late 2006 were conducted with a pre-API CJ-4 Delo prototype.
     11  +6 2014 sep 09measure of viscosityAccording to the Society of Tribologists and Lubrication Engineers (STLE), viscosity is one of an oil's most important physical properties. It is often one of the first ...
     11  +8 2014 sep 07exxon mobil chinaExxonMobil Opens New Lab in China - Machinery LubricationExxonMobil recently opened a new oil analysis laboratory at its Shanghai Technology Center in China . The new laboratory is the company's first in the Asia  ...
     11  +2 2014 sep 05hydraulic heat exchangerThe hydraulic power unit had a continuous power rating of 37 kW and was fitted with an air-blast heat exchanger . The exchanger was capable of dissipating 10 ...
     11  +5 2014 aug 09required machinery for laboratoryLaboratory -based Technician Skills to be Standardized - Machinery Laboratory -based Technician Skills to be Standardized ... monitoring and diagnostics of machines - requirements for qualification and assessment of personnel ...
     11  +8 2014 aug 05best sludge dissolver estersGood demulsibility to shed water that enters the lubrication system
     11  -1 2014 aug 05ball bearing lubricationProper Lubrication Keeps Bearings Rolling AlongThe lubricant provides a separating film between the bearing rolling ... Ten deep- groove ball bearings are fitted into five housings and filled with a given quantity ...
     11  +29 2014 aug 04alemite cordless grease gunGrease guns and grease fittings are widely used in today's industry and offer a simple means to ... Arthur Gulborg and his father named it “The Alemite High- Pressure ... the lever, pistol-grip, hand-grip, air-powered and battery -powered styles.
    1 2 of 10 pages